Machinist – Mitsubishi Power Saudi Arabia

1. Review specifications to determine setup procedure, machining sequence and dimensions. Read complex blueprints, bill of materials, and other specifications to determine product requirements.
2. Select fixtures, part holding, and tooling to machine parts as necessary.
3. Set up Rotors in CNC Lathe and machine to the specifications with minimal supervision.
4. Operate CNC lathe with Fanuc 31i controller.
5. Calculate and set controls to regulate machining factors such as speed, feed, depth and angle of cut according to established guidelines and procedures.
6. Align center of rotor or shaft within 0.001 mm.
7. Perform accurate dimensional measurement of rotor using CNC lathe.
8. Perform dynamic balancing of rotor and components of rotor using balancing machine
9. Give directions to fitters about balance correction based on result of balancing machine.
10. Give directions to fitters about runout correction of impeller based on result of runout measurement with minimal supervision.
11. Give directions to crane operator about handling of rotor.
12. Perform routine maintenance tasks on CNC lathe and VTL as required.
13. Perform routine maintenance tasks on balancing machine as required.

Job Details

Preferred Candidate